Advanced Setup Menu - Toshiba TD-U852 User Manual

Advanced Setup Menu

Smart Light Control
IRFM
Noise Reduction
DLC
Edge Enhancement
Wake Up from Sleep
DP Ver.
EDID Setup
Touch Control
(TD-U852TS only)
Enable dynamic contrast (DCR) or ambient light sensor.
Options: Off, DCR, Light Sensor
Default: Off
Create slight frame motion to help avoid image retention.
Options: On, Off
Default: Off
Reduce random noise in the video content.
Options: Off, Low, Medium, High
Default: Off
Enable Dynamic Luminance Control.
Options: On, Off
Default: On
Enhance the edge contrast of an image or video in an attempt to improve its
acutance (apparent sharpness).
Options: Off, Low, Medium, High, Auto
Default: Low
Options: VGA Only, Digital, RS232, Ethernet, Never Sleep
Default: VGA Only
(See next page for more details.)
Select DisplayPort version of the DisplayPort inputs.
Options: 1.1, 1.2; Default: 1.2
Note: DisplayPort 1.2 is the more modern standard and supports 3840x2160 @ 60 Hz
resolution. However, sometimes DisplayPort 1.1 is needed for compatibility with older
graphics cards.
Select EDID (Extended Display Identification Data) of the DisplayPort and HDMI
inputs.
Options: 1080p, 4K2K; Default: 4K2K
Note: Use the 1080p setting for the broadest support of lower resolution sources. Use
4K2K setting to support high resolution sources such as 3840x2160.
Select the source of the touchscreen control.
Options: Auto, OPS, External; Default: Auto
30