Buttons On The Touchscreen; Customer Programmable Features; Uconnect® 5.0 Settings - Dodge CHALLENGER 2017 Owner's Manual

250 UNDERSTANDING YOUR INSTRUMENT PANEL

Buttons On The Touchscreen

Buttons on the touchscreen are accessible on the
Uconnect® display.
Customer Programmable Features — Uconnect®
5.0 Settings
Push the + MORE button on the faceplate and then press
the "Settings" button on the touchscreen to display the
menu setting screen. In this mode the Uconnect® system
allows you to access programmable features that may be
equipped such as Display, Units, Voice, Clock, Safety/
Assistance, Lights, Doors & Locks, Auto-On Comfort &
Remote Start, Engine Off Options, Compass Settings,
Audio, Phone/Bluetooth®, SiriusXM Setup, Restore Set-
tings, Clear Personal Data and System Information.
NOTE: Only one touchscreen area may be selected at a
time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired mode,
select the preferred setting. Once the setting is complete,
either press the Back Arrow/Done button on the touch-
screen or the Back button on the faceplate to return to the
previous menu or press the "X" button on the touchscreen to
close out of the settings screen. Pressing the Up or Down
Arrow buttons on the right side of the screen will allow you
to toggle up or down through the available settings.
Display
After pressing the "Display" button on the touchscreen
the following settings will be available:
• Display Mode
When in this display you may select the Auto or Manual
display settings. To change Mode status, press and re-
lease the "Auto" or "Manual" button on the touchscreen.
Press the back arrow/Done button on the touchscreen to
return to the previous menu.