Brush Heads; Smart Ring Features; Timer; Pressure Sensor - Oral-B GENIUS 8000 Manual

Oral-B recommends using the «Sensitive»
mode (optional in combination with an
Oral-B «Sensitive» brush head).

Smart Ring features

Your toothbrush is equipped with a Smart
Ring (2) that has various functionalities indi-
cated via different colors of light:
White (default)= Operating and visual timer
light (choose individual color via Oral-B
app settings)
Red = Pressure sensor light
®
Blue = Bluetooth

Timer

You can choose between «Professional» or
«2-Minute» timer.
The «2-Minute» timer signals with a long
stuttering sound and a flashing light of the
Smart Ring (2) that the professionally
recommended 2-minute brushing time has
been reached.
The «Professional» timer signals with a short
stuttering sound and a flashing light of the
Smart Ring at 30-seconds intervals to move
to the next quadrant of your mouth (picture
3
). A long stuttering sound and a flashing
light indicate the end of the professionally
recommended 2-minute brushing time.
The timer memorizes the elapsed brushing
time, even when the handle is briefly swit-
ched off during brushing. The timer resets if
pausing longer than 30 seconds, briefly
pressing the mode button (4) during pause
or placing the handle on the plugged-in
charger.
Note: During the use of special Oral-B
features, the visual timer light may be deacti-
vated.
Timer setup:
Your toothbrush comes with the «Profes-
sional» timer activated. To change this, press
and hold the mode button (4) for 2 seconds.
Toggle between timer selection by pressing
the on/off button (3). Confirm selection by
pressing the mode button.
• 2 LED's illuminated indicate «2-Minute»
timer
• 4 LED's illuminated indicate «Professional»
timer
16
pairing indicator
Note: You can also set/advance the timer
functionality via Oral-B

Pressure sensor

If you put excessive pressure on your teeth,
the Smart Ring (2) will light up in red and the
motor speed will be reduced in «Daily
Clean», «Pro Clean» and «Sensitive» mode
(picture
of the pressure sensor by pressing moder-
TM
ately on the brush head during use.
Brushing modes (depending on model)
Your toothbrush offers different brushing
modes indicated on the brushing mode dis-
play (6) on your handle («Daily Clean» mode
does not illuminate on the brushing mode
display):
«Daily Clean»
«Pro Clean»
«Sensitive»
«3D White»
«Gum Care»
«Tongue Clean» – Tongue cleaning for
When operating the «Tongue Clean» mode,
we recommend using the «Sensitive» brush
head. You can brush your tongue either with
or without toothpaste. Brush the whole area
of your tongue systematically in gentle
movements. The recommended brushing
time is 20 seconds; indicated with a flashing
light of the Smart Ring.
TM
app
Your toothbrush automatically starts in the
mode selected last. To switch to other
modes, successively press the mode button
during use (picture
mode back to «Daily Clean» mode, press and
hold the mode button (4).
Note: You can also set/advance the mode
functionality via Oral-B

Brush heads

Oral-B offers you a variety of different Oral-B
brush heads that fit your Oral-B toothbrush
handle.
TM
App.
3
). Periodically check the operation
– Standard mode for daily
mouth cleaning
– For an extraordinary
clean feeling (operated
with a higher frequency)
– Gentle, yet thorough
cleaning for sensitive
areas
– Polishing for occasional
or everyday use
– Gentle massage of gums
occasional or everyday
use
4 ). To return from any
TM
App.