Setting The Network Camera Over The Lan - HIKVISION DS-2CD883F-E series Operation Manual

Network Camera· Quick Operation Guide
3 Setting the Network
Camera over the LAN
Purpose:
To view and configure the camera via LAN(Local Area Network),
you need to connect the network camera in the same subnet with
your PC. Then, install the SADP or iVMS-4200 software to search
and change the IP of network camera.
The following figure shows the cable connection of network

camera and PC:
Set the IP address of the camera for accessing via LAN.

Steps:
1. To get the IP address, you can choose either of the following
methods:
 Use SADP, a software tool which can automatically detect
network camera in the LAN and list the device information
like IP address, subnet mask, port number, device serial
number, device version, etc., shown in Figure 3-2.
Figure 3-1 Wiring over LAN
13