Manual Version: 6P101-20120928
Figure 6 Installing the front opacity shield
1
(1) Ventilation panel
Unpack the top opacity shield assembly, and clean the adhesive areas
5.
on the top surface of the chassis.
Adhere the mounting plates marked "LEFT" and "RIGHT" to the top left
6.
and top right edges of the chassis respectively and firmly press the
adhesive areas.
Adhere the mounting plates marked "REAR" to the top rear of the
7.
chassis and firmly press the adhesive area.
Keep the mounting plates dwell 24 hours.
BOM: 3104A0C3
2
(2) Front opacity shield
9
Part number: 5998-3449