HP 8800 Installation Manual page 10

Manual Version: 6P101-20120928
Figure 3 Installing the right-side opacity shield assembly
Unpack the rear opacity shield assembly and take out hex bolts.
10.
Completely loosen the M3 countersunk-head screws on the rear side of
11.
the chassis, and install hex bolts in proper holes.
Align the holes on the opacity shield with the holes of the hex bolts,
12.
press the opacity shield against the rear panel, and use M3
BOM: 3104A0C3
1
2
7
Part number: 5998-3449
3