Flash Compensation/Output
Adjust fl ash compensation or fl ash output (units in group
A, B, or C). The value for the current fl ash unit is added to
that selected for the group as a whole and applies regard-
less of the fl ash control mode selected with the master
fl ash, but note that only whole values can be selected with
the master fl ash if individual adjustments are made to fl ash
compensation on remote fl ash units.
1
Press the page button until the
Press the m function button
2
to highlight fl ash compensation/
output.
4
3
Rotate the command dial to
choose the desired option and
press OK.
51
page is displayed.