Manual Mode - FujiFilm EF-X500 Owner's Manual

Manual Mode

In manual mode, you can choose the fl ash output in frac-
tions of full power, from 1⁄1 (full power) to 1⁄512, in steps of
1⁄3 EV (note that depending on shooting conditions, output
may be less than selected if the limits of the camera expo-
sure metering system are reached).
1 Rotate the power switch to ON.
2 Press the page button until the
3
Press the l function but-
3
ton to highlight the fl ash control
mode.
4
Rotate the command dial to se-
lect B (manual) and press
OK.
31
page is displayed.