Assembly And Use Of The Nutri Ninja ® Cups - Ninja BL642W Owner's Manual

Assembly and Use of the Pitcher - cont.
USE
Fig. 6
Fig. 7
10 Review warning and caution statements on page 8
before proceeding.
NOTE: Nutri Ninja | Ninja Blender with Auto-iQ
® ®
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
11 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
12 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
13 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
14 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
9 1-877-646-5288
REMOVAL
Fig. 9
Fig. 8
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
™ use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15 Open the pour spout cap and use the spout to empty
liquid contents.
16 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
17 Make sure that the unit is unplugged when not in use.
18 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 11)
Assembly and Use of the Nutri Ninja
WARNING: Handle the Pro Extractor Blades
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 10
Fig. 11
Fig. 2 Fig. 3
NOTE: Nutri Ninja | Ninja
®
can sense which jar is on the motor base. The available
function lights will illuminate depending on which jar is placed
on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Add ingredients to the Nutri Ninja cup.
4
Place the Pro Extractor Blades
screw it on clockwise until you have a good seal. (Fig. 2)
5
Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
6 Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the
program.
Cups
®
Assembly with care, as the blades are sharp.
®
USE
Fig. 1
Fig. 4
Blender with Auto-iQ Technology 7 To pause the appliance, press the selected speed or Auto-iQ
® ™
program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.
8 Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the "Max Liquid" line.
9 Turn the cup upright and remove the Pro Extractor Blades by
® onto the cup and tightly
twisting the Pro Extractor Blades counter clockwise.
10 Place the Sip & Seal
and enjoy!
11 Make sure that the motor base is unplugged when not in use.
12 To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you.
REMOVAL
AUTO
Fig. 5 Fig. 6
lid onto the Nutri Ninja cup, twist to seal
®
www.ninjakitchen.com 10