Philips 105G7 User Manual page 18

3. Press the Menu Key again to select the function that you want to adjust.
4. Press the Up or Down Key to change the settings of the current function.
5. When the OSD window is active, it shows the input signal timing. The "H" stands for
the horizontal frequency and "V" for the vertical frequency.
6. To exit and save, either press the Exit Key, or leave the monitor alone for 10
seconds. If you want to adjust any other function, repeat steps 2-4.
Adjusting the Picture
Icon
Contrast
Brightness
Horizontal
position
Horizontal size
Vertical position
Vertical size
ZOOM
Pincushion
Trapezoid
Pin-Balance
Parallelogram
Rotation
Adjustment
Adjusts the contrast between the foreground and
background of the screen image.
Adjusts the background brightness of the screen
image.
Moves the screen image to the right or left.
Adjusts screen width.
Moves screen image up or down.
Adjusts screen height.
Adjust the picture's horizontal and vertical size
simultaneously.
Straightens the left and right vertical edges of the
display.
Adjusts the width of the top and bottom of the
screen.
Adjust to compensate the pincushion unbalance.
Adjusts the viewing area when it is tilted left or
right.
Adjust the picture tilt to horizontal position.