Table of Contents
Advertisement
Quick Links
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and fire. To prevent potential danger, please observe the following
instructions when installing, operating, and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Display, please read the following
precautions carefully before using the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician to replace the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled, or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- 1 -
www.SCEPTRE.com
SCEPTRE E30 Display User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sceptre E305B-FU200TW
Summary of Contents for Sceptre E305B-FU200TW
-
Page 1: Safety Instructions
- 1 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... - Page 2 No naked flame sources, such as lighted candles, should be placed on the ap paratus. 10. Use only the Sceptre-provided power cable or AC adapter approved for use with this device. Utilisez uniquement la ligne d’alimentation électrique fournie par la verge ou l’adaptateur de courant...
- Page 3 SAFETY INSTRUCTIONS - 3 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
-
Page 4: Important Information
The house icon identifies that this product is for indoor use. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to https://www.P65Warnings.ca.gov. - 4 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... - Page 5 • Do not place the display on cloth or indicated on the label. If you are not other materials that may be located sure of the type of power supplied to - 5 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
- Page 6 5°C ~ 40°C, Humidity: 10% to 85% power cord, and contact your dealer non-condensing, Altitude: 0~2,000 m. immediately. Do not try to repair the product yourself. - 6 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
- Page 7 To ensure safety and many years of trouble-free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor.
-
Page 8: Opening The Package
Opening the Package The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening, it is recommended that the display package must be handled by a minimum of 2 or more persons. -
Page 9: Installing The Monitor Stand Assembly
Obtain the display base and attach it to the display neck. While the neck is attached to the base, insert, and tighten 2 base screws to the bottom of the base. - 9 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... - Page 10 If you are placing the display on a stand, we would recommend using a display safety strap (not included) to minimize the possibility of the display toppling over. Securely install all screws and connections. - 10 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
-
Page 11: Removing The Stand For Wall Mounting
Remove the rubber cover and unscrew the single screw to remove the stand. 2. Once the stand is removed, you will see the indentation where you can install the mounting plate. The mounting pattern is 100mm x 100mm using M4 x 10mm screws. - 11 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 12: Table Of Contents
How do I detach the DisplayPort Cable? ............How do I clean the monitor? ................Specification ....................34 LIMITED PRODUCT WARRANTY ..............35 Disclaimer, Trademarks, Icons & Copyright Information ........ FCC Compliance Statement ................38 - 12 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 13: Identifying Front And Rear Panel
Indicator Light – The light is blue when the monitor is turned on. The light is red when the monitor is turned off but plugged into power. The light is flashing blue when there is no signal given to the monitor. - 13 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 14: Front View With Buttons
– When the OSD Selects which input device is to be displayed on the monitor. – When the OSD Preset values that adjust color accordingly to your purpose of use. – When the OSD turns the display on or off. - 14 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 15: Panel Tilt Adjustment
Generally, it may be inclined 5°±1°forward and 15°±2° backward. Please Note: • When adjusting the angle of the monitor, be sure not to touch or press the LCD screen. - 15 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 16: Rear View With Connections
• DP at native resolution 2560 x 1080 will support 200Hz. • To remove the DP cable from the monitor, you need to depress the buckle on the cable while unplugging. - 16 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 17: Connections
HDMI ports support AMD FreeSync only. • HDMI 1-2 supports up to 190Hz refresh rate. • At the optimal resolution of 2560 x 1080, the supported maximum refresh rate is 190Hz for HDMI. - 17 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 18: If You Have Displayport Connection On Your Video Card
DisplayPort supports AMD FreeSync only. • DisplayPort supports up to 200Hz refresh rate. • At the optimal resolution of 2560 x 1080, the maximum support refresh rate is 200Hz for DP. - 18 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 19: On Screen Display (Osd) Menu
Use the When you want to exit, press the button. - 19 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 20: Quick Start
– This option forces any resolution to a 16:9 square format. 16:9 DOT BY DOT – This option displays the resolution exactly as is. – Selects which input device is to be displayed on the monitor. SOURCE - 20 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... - Page 21 – Adjusts the blue light value to reduce strain on eyes. BLUE LIGHT SHIFT – This option turns on or off AMD FreeSync, enabling smoother FREESYNC™ gameplay. - 21 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
-
Page 22: Picture
This option forces any resolution to a 16:9 square format. DOT BY DOT – This option displays the resolution exactly as is., SHARPNESS – This option adjusts changes picture softness and clarity for this monitor. - 22 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 23: Blur Reduction
This option displays a second source of video in a small window at the comer of the monitor. PBP – This option displays a second source of video on the right half of the monitor. - 23 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 24: Color
Adjusts the tint and saturation of the six colors (Red, Green, Blue, Cyan, Magenta, Yellow). – This option adjusts the picture's white color details. GAMMA – This option adjusts changes the color white balance. TINT - 24 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... - Page 25 – This option adjusts changes the color saturation level. SATURATION – This option adjusts the black levels of the display BLACK LEVEL EQUALIZER – This displays the blue light value to reduce strain on eyes. BLUE LIGHT SHIFT - 25 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
-
Page 26: System
This option changes the monitor menu language. OSD H POSITION– This option adjusts the On-Screen Display (OSD) left or right. OSD V POSITION – This option adjusts the On-Screen Display (OSD) up or down. - 26 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... - Page 27 11. MUTE – This option turns on or off the Mute function, silencing the audio output of the monitor source. 12. RESET – This option resets the monitor to Sceptre's factory default settings. - 27 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
-
Page 28: Supported Video (Displayport) Resolution
1024 x 768 @ 60Hz, 70Hz, 75Hz 800 x 600 @ 60Hz, 75Hz 640 x 480 @ 60Hz, 75Hz * Specifications are subject to change without notice. * HDMI: 2560 x 1080 @ 190Hz. - 28 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 29: Troubleshooting
Please remember to make sure your refresh rate should be at 60Hz. I CAN’T OPEN THE You need to have a valid video signal going through the monitor before turning on the OSD. - 29 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... - Page 30 SYSTEM options. I CHANGED MY Open the OSD, under SYSTEM, select RESET to reset COLOR SETTINGS all values back to factory default. NOW I CAN’T GET THE FACTORY DEFAULT BACK. - 30 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
- Page 31 Make sure your video card supports that feature. Also, HIGHER REFRESH make sure your video card drivers are the newest version RATES ON MY possible and the cable is capable of supporting higher MONITOR Refresh Rates. - 31 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
-
Page 32: How Do I Detach The Displayport Cable
How do I detach the DisplayPort Cable? To detach the DP cable from the monitor, press down on the cables unlocking button while pulling the cable out. - 32 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 33: How Do I Clean The Monitor
Wipe the display with a dry microfiber cloth or 100% cotton cloth afterward. - 33 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 34: Specification
Blue Light Shift Available HDMI (v2.0) x 2, DP (v1.4) x 2, 3.5mm Audio Out FCC, cTUVus, ISTA, HDMI, RoHS, Compliance ™ AMD FreeSync Premium *Specifications are subject to change without notice. - 34 - www.SCEPTRE.com SCEPTRE E30 Display User Manual... -
Page 35: Limited Product Warranty
In the event that the part required for replacement is no longer in production and/or is obsolete, SCEPTRE will repair or replace the unit with similar or like parts of equal value. If a similar or like part is not available, a charge may be incurred to the owner for any upgraded parts substituted. - Page 36 Dead Pixel Policy SCEPTRE sets the limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within the normal performance specification of the LCD and is not considered defective.
-
Page 37: Disclaimer, Trademarks, Icons & Copyright Information
SCEPTRE is a trademark or registered trademark of Sceptre Group. • Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material or the performance or use of this product. -
Page 38: Fcc Compliance Statement
European Notice Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community. - 38 - www.SCEPTRE.com SCEPTRE E30 Display User Manual...
Need help?
Do you have a question about the E305B-FU200TW and is the answer not in the manual?
Questions and answers