Battery Installation - Sangean DT-160CL Manual

Battery Installation

The Battery cover is located on the back of the unit. Slide the
cover downwards to gain access to the battery compartment.
Insert two AA (UM-3) batteries into the compartment. Make
sure that the battery is positioned in accordance with the
indicated diagram. Replace cover.
Press and release the POWER/BAND button will turn on the
radio.Press and hold the POWER/BAND button until "off"
symbol appears on the LCD display. The radio will turn off.
Note:
. You can always monitor the battery power from the LCD
display battery icon when battery power becomes very low
and unable to operate the radio. The low battery indicator
icon will flash together with an "E" appearing on the LCD
display. The radio will shut off.
. Make sure to replace the batteries within 3 minutes. This
will prevent any memory presets from being lost during the
battery replacement.
Antenna/Earphone
Insert the earphone into the earphone jack. The cord
connecting the earphone to the receiver acts as an antenna
during FM audio reception and should be extended as much
as possible to increase the sensitivity.
A built-in ferrite bar antenna is provided for AM reception,
it is only necessary to rotate the radio for maximum signal
strength during AM listening.
3