Canon TS8000 series Online Manual page 281

3. Select Device settings.
4. Select LAN settings.
5. Select Wireless LAN.
6. Select WLAN active/inactive.
7. Select Active.
If you do not use the printer over wireless LAN, select Inactive.
Changing Wireless Direct Setting
Change the settings for the Wireless Direct following the procedure below.
1. Make sure printer is turned on.
2. Select Setup on the HOME screen.
Using the Operation Panel
3. Select Settings.
4. Select Device settings.
5. Select LAN settings.
6. Select Wireless Direct.
7. Select a setting item.
• To update the identifier (SSID) and the password for Wireless Direct
281