Printing The Nozzle Check Pattern - Canon TS8000 series Online Manual

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
tank whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the touch
screen. Select A4 or Letter for Page size, then select Register.
If a message is displayed on the screen, follow the directions in the message to complete registration.
Note
• Be sure to load paper in the cassette. Even if you load paper on the rear tray, the nozzle check
pattern is not be printed.
3. Select Setup on the HOME screen.
Using the Operation Panel
The setup menu screen will appear.
4. Select Maintenance.
The Maintenance screen will appear.
5. Select Print nozzle check pattern.
92
Replace the ink