3-26) Machine Compartment
Part name
1. Unscrew 5 screws of cover compressor.
2. Disengage the housing connector.
3. Remove the bracket of support circuit motor
4. Remove the screw with a flat-blade
Motor Fan
5. Remove the motor fan by pulling the fan out
6. Unscrew 2 screws fixed in the motor.
7. Remove the hook of the motor cover with a
How to do
(Refer to the picture)
Before doing the above, make
sure that the unit is unplugged.
CAuTION
by lifting the bracket up and pulling it out.
screwdriver.
(Refer to the picture)
while holding the motor part.
(Refer to the picture)
flat-blade (-) screwdriver and then remove
the motor.
46
disassembly and reassembly
descriptive Picture