disassembly and reassembly
3-28) Electric Box
Part name
PBA Main
PBA INVERTER
How to do
1. Remove the 2 screw attached to the upper
left and right Case PCB Panel with a phillips
screwdriver(+).
2. Disengage all housing connectors from the
main PCB.
Before doing the above, make
sure that the unit is unplugged.
CAuTION
3. Press the lower locking hook down and
remove the Main PBA by pulling it out.
(Refer to the picture)
1. Remove the INVERTER PBA by lifting the
upper part of the hook up.
49
descriptive Picture