3-27) COMPRESSOR
Part name
1. Cut off the LOKRING connecting the COMP
2. Cut off the LOKRING connecting the
COMPRESSOR
3. Link the COMP and the CONDENSER with
4. Link the CONDENSER and the HOT PIPE
How to do
and the CONDENSER with a Pipe Cutter.
(Red-line marking points)
CONDENSER and the HOT PIPE with a Pipe
Cutter. (Red-line marking points)
a PIPE-CONNECTOR (DA81-05659A) by
brazing the joint areas.
with a PIPE-CONNECTOR (DA81-05659B)
by brazing the joint areas.
48
disassembly and reassembly
descriptive Picture