Camera Setup; Pairing - TECHVIEW QC-3762 User Manual

Camera Setup:

This allows you to pair existing or additional cameras, turn the cameras on or off and adjust
the resolution as shown below:

Pairing:

Your camera is already pre-paired to the monitor on channel 1. When you add a new camera
to your system, you have to "pair" the camera and monitor to each other so they can
communicate. You can also use pairing to change one camera to a different channel if
required.
Please Note: If the camera is already assigned to the selected channel, pairing on the same
channel will overwrite the current camera with the new one.
Please only pair one camera at a time otherwise the cameras may interfere if multiple is
pairing at once.
1. Press the pairing button on the camera setup screen.
2. Select the channel number you want to pair the camera to.
3. A message will be displayed with instructions to press the pair button on the camera.
Press and release the pair button located at the rear of the camera. A 30-second
countdown will begin.
Please Note: You must press the pair button on the camera during the 30-second
countdown otherwise the camera will not pair with the monitor
4. The system will display live video 3 seconds after the camera has successfully paired.