TECHVIEW QC-3762 User Manual page 14

Main Screen Sub-Screen
Paring
Camera Setup
ON/OFF
Resolution
Duration
Recording
Setup
Scheduled
Recording
File Overwrite
Date & Time
Time Zone
System Settings
Language
Default Settings
Format SD Card
Information
A single screen lets you set motion detection sensitivity for each
Motion
camera.
Detection
It also lets you determine which viewing areas for each camera should
Settings
be masked from motion detection.
Firmware Let's you select to upgrade your firmware if neccesary (from SD card).
Upgrade
Description
This system comes with cameras already paired.
Use Pairing to assign these cameras to different
channels or to pair additional new cameras to the
monitor.
Makes the cameras visible to the monitor.
Adjusts the video quality of each camera.
Set the length of time the camera records once
motion sensitivity triggers the camera to record.
The options are 15 seconds (Default), 30 seconds, or
1 minute.
Set up a schedule for pre-determined recording
times and lengths.
Overwrites the oldest recorded data on the SD card
once the card is full.
•Time Setting: Set the current time (including
daylight savings Time).
•Time Zone: Set the time zone for your system.
•Set the time zone for your system.
•Enable/Disable Daylight Savings Time.
Changes languages setting for the monitor (English,
French or Spanish)
Restores the system to default settings.
Reformats the SD card and deletes all existing data.
Displays the current firmware information for the
monitor and each camera.