Advertisement
RS232LOCK: possible commands: SET. Binary value ON or OFF. With the command:
"SET RS232LOCK ON" you can lock operation via RS232. The RS232 lock function will be
active ONLY WHEN THE (front panel) LOCKMODE IS SET TO LOCKED OR VOL ONLY! When
lock mode is set to LOCKED or VOL ONLY, it is not possible to unlock the RS232 lock using
an RS232 command! First unlock the unit using the front panel controls -> RS232 lock will
automatically be unlocked.
factory default settings: if, for any reason, you feel the need to restore the factory default settings,
you have to send a command via RS232: "SET RESTORE ON". The unit will restart automatically
and default settings will be written to the internal memory during power up. It is not possible to
restore the factory default settings via the front panel controls.
After a firmware upgrade, all user defined settings will be maintained, however, it is
recommended to check and adjust the settings after a firmware upgrade. The newest firmware
will be available on our website: www.apart-audio.com
A firmware updater program will also be available for download. In order to update the
firmware, you need a computer with a working serial port and an appropriate serial cable
between Champ 3D and your computer. If you are not familiar with serial ports and cables, ask
for assistance from a qualified engineer.
19
INFO@APART-AUDIO.COM
Advertisement
