22
English
Appendices
Troubleshooting
If you are experiencing trouble with the projector, refer to the following. If
the problem persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
Ensure all the cables and power connections are correctly and securely connected as
4
described in the Installation section.
Ensure the pins of connectors are not crooked or broken.
4
Check if the projection lamp has been securely installed. Please refer to the Chang-
4
ing the lamp section.
Make sure you have removed the lens cap and the projector is switched on.
4
Problem: Partial, scrolling or incorrectly displayed image.
Press the Resyncbutton on the Remote Control.
4
If you are using a PC:
4
If the resolution of your computer is higher than 1024 x 768. Follow the steps
outlined below to reset the resolution.
For Windows 3.x:
1. In the Windows Program Manager, click the Windows Setup icon in the Main
group.
2. Verify that your display resolution setting is less than or equal to 1024 x 768.
For Windows 95:
1. Open My Computer icon, the Control Panel folder, and then double click the
Display icon.
2. Select the Setting tab.
3. In the Desktop Area you will find the resolution setting. Verify that the resolu-
tion setting is less than or equal to 1024 x 768 resolution.
If the projector is still not projecting the whole image, you will need to also change
the monitor display you are using. Refer to the following steps.
Downloaded from ProjectorsManual.com Manuals