Management
Menu Location
4
Choose the Menu location on the display screen.
Projection
4
l
The factory default setting.
l
When you select this function, the projector reverses the image so you can project behind
a translucent screen.
l
When you select this function, the projector turns the image upside down for ceiling-
mounted projection.
l
When you select this function, the projector reverses and turns the image upside down at
same time. You can project from behind a translucent screen with ceiling mounted
projection.
Signal Type
4
Select signal type between RGB, HDTV and Component video sources.
Lamp Reminder
4
Choose this function to show or hide the warning message when the changing lamp message
is displayed. The message will show up 30 hours before end of life.
Lamp Reset
4
Reset the lamp setting only when the new lamp is replaced.
Downloaded from ProjectorsManual.com Manuals
Computer / Video mode
Image-I
Language
Menu Location
Projection
Signal Type
RGB
Front-Desktop
Rear-Desktop
Front-Ceiling
Rear-Ceiling
Image-II
Audio
Management
Lamp Reminder
Lamp Reset
Component
HDTV
21
English