(12P) X 20; Cam Cover Screw Cover - Room essentials 417087 Assembly Instructions Manual

step 12.
WARNING
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
• Install tip-over restraint provided.
• Place heaviest items on the lowest surfaces as
far back from the front edge as possible.
• Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this item.
• Never allow children to hang on drawers, doors
or shelves.
Use of tip-over restraints may only reduce, but
not eliminate, the risk of tip-over.
This is a permanent label. Do not attempt to remove!

(12P) x 20

(20P) x 8
cam cover screw cover
Center a SCREW COVER (20P) over the head of each SILVER SCREW in the SIDE SKIRTS (K) and press firmly.
Push a CAM COVER (12P) onto each visible HIDDEN CAM.
NOTE: The HIDDEN CAMS on the bottom of the BOTTOM SHELF (D2) do not get CAM COVERS.
NOTE: You may need to use a hammer to tap the COVERS onto the SCREWS and HIDDEN CAMS.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
17
20P
(8 used)
To cover screws
12P
(20 used)
To cover HIDDEN CAMS
30 lbs.
K
25 lbs.
25 lbs.
D2
35 lbs.
K
417087