Ricatech RR3100 User Manual page 12

ENGLISH
RECORDING
From CD to SD/USB
The system is capable to convert whole CD disc to MP3 format and copy to USB mass storage device or SD card. And
also have the ability to copy one single MP3 track to and from on USB/SD card.
1. In CD playback mode, press REC / to start ripping to USB/SD card (default USB if both device are detected),
playback will be stopped and skipped back to the beginning of current track, system will scan the contents of USB/SD
card and create folder to store MP3 track. Resume CD playback and start ripping from the moment. The corresponding
target device icon " USB " / " CARD " start flashing.
2. Press STOP / to exit CD ripping.
MP3 copying
1. In CD-MP3, USB or SD card playback mode, press REC /
to SD card or vice versa. Playback will be stopped and system will scan the contents of USB/SD card and create
folder to store MP3 track.
2. icon " REC displayed
3. Message COPY 01 will be displayed, the proportional copied percentage will be shown on the decimal number.
4. The target device icon "USB" or "CARD" start flashing, the decimal number will be increment from 01 as MP3 copying
starts, the process will stop as it reach 100
5. Current MP3 will be playback from beginning
From Phono to SD / USB
The system is capable to convert audio signal from PHONO input to MP3 format and store in USB mass storage device
or SD card (default USB if both devices are detected)
1. Press the FUNCTION / to set the unit to PHONO mode.
2. Press REC / to start ripping, the system will scan the contents of USB/SD card and create folder to store MP3
tracks.
3. Icon " REC " and message " RIPP TO" are displayed, icon " PHONO " start flashing.
4. The target device icon " USB " or " CARD " start flashing as ripping begins.
5. Press STOP / to exit PHONO ripping
From AUX to SD/USB
The system is capable to convert audio signal from AUX input to MP3 format and store in USB mass storage device or
SD card (default USB if both devices are detected).
1. Press FUNCTION / once or more to select AUX
2. Press REC / to start ripping, the system will scan the contents of USB / SD card and create folder to store
MP3 track.
3. Icon "REC" and message " RIPP TO " are displayed, icon " AUX " start flashing.
4. The target device icon " USB " or " CARD " start flashing as ripping begins.
5. Press STOP / to exit AUX ripping
Note: The message " NO FUNCT " will be displayed if any key pressed during AUX ripping process. The message "
NO DEV " will be shown if neither USB or SD card not detected. The message " FULL " will be displayed if not enough
memory in target device.
to start MP3 copying from CD to USB/SD card, or USB
10
ESPAÑOL
LOCALIZADOR DE CONTROLES
BAJAR VOLUMEN SUBIR VOLUMEN
TOMA PARA AURICULARES
ALTAVOZ
PREAJUSTE -
PREAJUSTE + INDICADOR
DE MODO DE
TARJETA SD
ESPERA
LUZ
PROGRAM
ARRIBA
TEMPORIZADOR
ABAJO/RETRO
BANDEJA DEL CD
PLATO ADAPTADOR PARA DISCOS DE 45 RPM
EJE
33 45 78
SELECTOR DE CONTROL
DE VELOCIDAD (33 1/3, 45, 78 RPM)
CONTROL
DESUBIDA/
GRABAR/
BAJADA DEL
ALIMENTACIÓN
BORRAR
VOLUMEN
FUNCIÓN
PUERTO
SENSOR PANTALLA LCD
USB
REPRODUCCIÓN/PAUSA
PARADA
ABRIR/CERRAR CD
REPETIR/ESTACIÓN
55
BRAZO
DEL
TOCAD
ISCOS
SOPOR
TE DEL
BRAZO
DEL
TOCADI
SCOS