Aux Operation - Xomax XM-DTSB1010 Installation Manual

Touch Screen Operation
A U X Ope r a tion
On the front panel of this unit, there is an
AUX IN jack, follow the diagram below to
connect analogue replay devices(only
for the Audio connect, if you want to
connect the Video, please plug the
<Video input > on the back of the unit .) .
Use this jack to replay sound of other
replay equipment such as Digital Video
players, computers, etc. Via the loud-
speakers.
1). Please connect the external device
with stereo jack (3.5mm)plug the Aux in
socket .
AUX IN JACK FRONT PANEL
AUX IN
2). In radio mode, touch the screen
of " " ICON to enter the main menu,
touch the " AUX " ICON to enter the
AUX IN mode .
In AUX mode, tap
the brightness for the display .
AUX IN
Ground
R ight
Lef t
icon to adjust
A U X IN TER FA C E 1
A U X IN TER FA C E 2
3). You now hear the sound from the
external device played back through
the loudspeakers .
The function of the icons as follow:
Tap to mute the sound.
Tap to select EQ as the same on the
remote control.
Loudness Function
Subwoofer Function.
Tap to adjust audio volume.
Turning pre-switching for traffic
announcements on and off
Switching on and off an
Alternative frequency
Tap to turn to BT PHONE mode.
(after pairing and connecting a mobile
phone with
-29-
.
.
.
BT
function).