Table of Contents
Advertisement
CUSTOMIZING THE DVD FUNCTION SETTINGS
LANGUAGE SETUP
1 . Press the SETUP button in stop mode.
2 . Use the
button to change the highlight cursor. Use the
to select a language, then press the ENTER button. The screen will
change to your selected language immediately.
3 . To exit the SETUP MENU and return to the normal screen, press the
RETURN or SETUP button.
VIDEO SETUP
1 . Press the SETUP button in stop mode.
2 . Use the
button to select LANGUAGE SETUP, then press the
button repeatedly until VIDEO SETUP appears.
3 . Use the
or
button to select the option (BRIGHTNESS, CONTRAST or
VIDEO), then press the
adjustments, then press the ENTER button. (The screen will change to
your selected setting).
4 . Repeat steps 2 and 3 above to adjust other options.
5 . To exit the SETUP MENU and return to the normal screen, press the
RETURN or SETUP button.
SYSTEM SETUP
1 . Press the SETUP button in stop mode.
2 . Use the
button to select LANGUAGE SETUP, then press the
button repeatedly until SYSTEM SETUP appears.
3 . Use the
or
button to select the option (TV TYPE, DEFAULT or LIGHT),
then press the
button. Use the
press the ENTER button. (The screen will change to your selected setting).
4 . Repeat steps 2 and 3 above to adjust other options.
5 . To exit the SETUP MENU and return to the normal screen, press the
RETURN or SETUP button.
TV TYPE
Pan Scan
• When wide-screen video is played, this mode clips the right and left
sides of the image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letterbox mode (black bands that appear at the
top and bottom of the screen).
Letter Box
• When wide-screen video is played in this mode on a conventional
screen, black bands appear at the top and bottom of the screen.
Wide screen
• This is the correct mode for playing wide-screen videos on the unit
screen or other external wide-screens.
Note:
• The displayable picture size is preset on the DVD. Therefore the playback
picture of some DVDs may not conform to the picture size you select.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback
picture will always appears in the 4:3 aspect ratio regardless of the TV
TYPE setting.
• If the screen mode is still not correct, press the LCD MODE button
repeatedly to adjust it.
DEFAULT
It takes 3-5 seconds to reset the DVD settings to the factory default.
PLV31190CS1-DC_IB_ENG_AUD.pmd
button. Use the
or
or
button to make adjustments, then
25
25
or
button
or
button to make
or
Cut off when a wide-
screen video image is
played.
PAN SCAN
LETTER BOX
WIDE SCREEN
20/04/2007, 16:51
Advertisement
Table of Contents
