Table of Contents
Advertisement
USING HEADPHONES
• Turn down the volume before connecting
headphones to the unit, then adjust the
volume to your desired level.
• When headphones are connected, no sound
will come from the front speakers.
Note:
• Avoid listening to sound at high levels for
prolonged periods of time. This may be
harmful to you and may cause hearing loss.
UNIT OPERATION
TURNING THE UNIT ON
When the AC power cord is connected, press the STANDBY/ON button on
the top of the unit to turn it on. Press the FUNCTION button to select the
desired mode (TV/AV IN/YUV IN/DVD/PC IN). If you select DVD, the DVD
logo will appear on the screen.
Note: When the unit is not going to be used for a long time, disconnect the
AC power cord from AC power outlet.
TURNING THE UNIT ON FOR THE FIRST TIME
The first time for you turning on the unit, the unit will enter Virgin mode. You can easily follow
up prompt message on screen to finish basic settings of the system.
1. Press the ENTER button to proceed the Initial Setup.
2. Use
the
/
button to the next step.
3. Use the
/
button to select your TV tuner source (Antenna or Cable), and press the
button to the next step.
4. Make sure RF aerial has been connected properly to TV ANTENNA input jack on the rear of
the system, press the ENTER or
preset all available TV channels.
5. After scaning finished, "Inital setup is Complete." will appear on the screen. Press the
ENTER button to finish Initial Setup.
After finishing above settings, the system will return to the first TV channel scaned just now.
SOUND SYSTEM
DOLBY DIGITAL (FOR DVD)
Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically
recognizes DVDs that have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system.
Look for this logo on your unit.
Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D
Laboratories.
PLV31190CS1-DC_IB_ENG_AUD.pmd
button
to
select
your
button. The system will automatically start to scan and
symbol are trademarks of Dolby
19
19
OSD
language,
and
20/04/2007, 16:51
press
the
Advertisement
Table of Contents
