Air Live VH-4GW User Manual page 18

3. Configuring the VH-4GW
Step 4 WAN Interface setting
WAN interface Configuration: Choose the physical interface and WAN type for
Internet connection.. Press " Next" to continue
Step 4-1 : When 3G/4G is selected
Please make sure you have inserted SIM card. If not, please power off this gateway,
and insert SIM card first. Then you can select "Auto-Detection" to finish dail-up
profile automatically. Press "Next" to continue.
Step 4-2 : When Ethernet is selected
In Ethernet is selected as the Physical interface , there are 5 difference WAN type.
Please select the correct WAN type and click Next for setting
Step 5: Ethernet LAN interface
LAN interface configuration: Change the LAN IP address and subnet mask of this
gateway for the Intranet. You can keep the default setting and go to next step. Press
"Next" to continue.
Step 6 WiFi LAN (2.4G)
WiFi LAN interface configuration: Change the SSID, Channel Number,
Authentication and Encryption for first virtual AP of this gateway. You will see on
your PC when doing wireless network scan. It is strongly recommending to add
authentication and encryption in your wireless network to prevent any unknown WiFi
clients and keep transferred data secured. You can also keep the default setting and
go to next step.Press "Next" to continue.
Step 7 Confirm and Apply
Check the new settings again. If all information is correct, please press "Apply"
button to save new settings. Then it will take 65 seconds to restart this gateway and
take new settings effective.
Step 8 Counting Down
Configuration is completed. Press "Finish" button to close Setup Wizard and browser
counts down for 65 seconds and provides you with "Click here" button to reconnect
to the device
14
AirLive VH-4GW User Manual