Electromagnetic Compatibility - Agilent Technologies 5977B series Troubleshooting And Maintenance Manual

Electromagnetic compatibility

This device complies with the requirements of CISPR 11. Operation is subject
to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try one or more of the following measures:
• Relocate the radio or antenna.
• Move the device away from the radio or television.
• Plug the device into a different electrical outlet, so that the device and the
• Make sure that all peripheral devices are also certified.
• Make sure that appropriate cables are used to connect the device to
• Consult your equipment dealer, Agilent Technologies, or an experienced
Changes or modifications not expressly approved by Agilent Technologies
could void the user's authority to operate the equipment.
Sound emission declaration
Sound pressure
Sound pressure Lp <70 dB according to EN 27779:1991.
Schalldruckpegel
Schalldruckpegel Lp <70 dB am nach EN 27779:1991.
5977B Series MSD Troubleshooting and Maintenance Manual
that may cause undesired operation.
radio or television are on separate electrical circuits.
peripheral equipment.
technician for assistance.
1
Introduction
29