Sony KP-41 EXR96 Operating Instructions Manual page 51

Follow these instructions to select an MTS mode.
Select MAIN mode to listen to stereo sound.
The STEREO lamp on the projection TV lights up whenever a
stereo bK_dcast is received.
Select SAP mode to listen to Second Audio Programs.
Select MONO mode to eliminate ,excessive noise during
stereo broadcasts, caused by a weak incoming signal.
Note
If the proj_._ction "IV is in video mode, the "MTS" display is shaded
and cannot be selected..
Press TV/VIDEO on the projection TV or on the Remote
Commander to change to "IV mode.
Remote Commander
D_._Y (_ ENTER
JUMP
AN WINDOW VOL CH
FAVORITE
VTRI-2-3 MDP "Iv CABLE BOX
Press MENU.
The main menu appears.
I,F_qPROGPALETTE
_]MODE SET
_TIME
_SET UP
mENGLISH
F+'ICONV ERGENC E
Press AN WINDOW +/- until the cursor points to
=MODE SET."
Press RETURN. The mode set menu appears.
[]
,S-VIDEO :OFF
MTS :MAIN
SPEAKER :MAIN
_MENU
Press AN WINDOW +/-- untilthe cursorpointsto "MTS."
Press RETURN.
The mode display turns red.
Press AN WINDOW +/- to select the mode you want. Each time you press AN WINDOW +/-, "MAIN," "SAP" and
"MONO" appear in sequence.
Press RETURN.
The mode is selected.
To return to the previous menu
Press hA/WINDOW +/- until the cursor points to
" _;_ MENU."
Then press RETURN.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen
Press MENU.
,_.: ._.
5"
Chapter 3:Usin0 .A.d',_lrtcedFeatures
51