Sony KP-41 EXR96 Operating Instructions Manual page 73

lrout31esnooUng
Disturbances in picture and sound can often be eliminated by checking the symptoms and following the suggestions listed here.
If'the problem still cannot be solved, contact your nearest service facility.
Symptom Possible causes and remedies
No picture (screen not _it), no sound
Poor or no picture (screen not lit), good sound
Good picture, no sound
No color for color programs
Snow and noise only
Dotted lines or stripes
Double images or ghosts
• Make sure POWER is switched on.
• Check the power cord connection.
• Check that the rVNIDEO and V'iR1-2-3 MDP controls are set
correctly.
• Make sure that the "I'V/CABLE BOX selector is set to TV.
• Adjust the picture using the VIDEO screen (pp. ,_4 - 47).
• Check the antenna/cable connections.
• Adjust the color registration (pp. 24 - 25).
• Press VOLUME + on the projection TV or VOL + on the Remote
Commander.
• Press MUTING on the Remote Commander.
• Check the MTS setting (p. 51).
• Check that the TV/VlDEO and VTR1-2-3 MDP controls are set
correctly.
• Make sure SPEAKER is set correctly (p. 52).
• Check the HUE and COLOR settings (pp. 44- 45).
• Check that it is an active or correct channel.
• Check the cable setting.
• Check antenna/cable connections.
This is often caused by local interference (for example, cars, neon
signs and hairdryers). Adjust the telescopic aerial for minimum
interference.
Reflections from nearby mountains or buildings often cause this
problem. Connecting a highly directional outdoor antenna or a
CATV cable may improve the picture.
Remote control does not operate • Check the battery in the Remote Commander.
No picture and/or sound for the
connected equipment
• Check that the TV/VIDEO button is set correctly
• Check that the connections are properly made.
• Check that the power of the connected equipment is turned on.
• Check that the connected equipment is set correctly.
Try another channel. It could be station trouble.
-'4
N
g_