Zenith Z42PJ240 Installation And Operating Manual page 53

Adjusts the contrast to keep it at the best level according to the brightness of the
I
Dynamic Contrast
screen. The picture is improved by making bright parts brighter and dark parts darker.
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances
I
Dynamic Color
hue, saturation and luminance so that red, blue, green and white look more vivid.
Noise Reduction
Reduces screen noise without compromising video quality.
I
Low : Make dark and middle gray level area of the picture brighter.
Medium: Express original picture levels.
Gamma
High: Make dark and middle gray level area of the picture darker.
You can adjust brightness of dark area and middle gray level area of the picture.
I
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
Auto: Realizing the black level of the screen and set it to High or Low automatically.
Black Level
Set black level of the screen to proper level.
I
This function enables to select 'Low' or 'High' in the following mode: AV (NTSC-M),
I
HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
Makes video clips recorded in film look more natural by eliminating judder effect.
I
Film Mode
DVD and Blu-ray movies are filmed at 24 frames per second.
I
Standard: Displays standard color area.
Wide: Mode to use and set the rich color area of the display.
Maximize the utilization of color to increase color quality.
I
Color Gamut
Show clearer and distinctive yet natural corners of the video.
I
Edge Enhancer
Convert the color of a different video to HD color.
I
Color Standard
This is the function to adjust the overall color of the screen to the feeling you want.
I
a. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
White Balance
b. Method : 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be
set among 5, 10, 1 5 - 95, 100. You can adjust Red, Green or Blue according to each setting.
- Red/Green/Blue: The adjustment range is -50 - +50.
As the tool used by the experts to make adjustments by using the test patterns,
I
this does not affect other colors but can be used to selectively adjust the 6 color
areas (Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjustments for
Color Management
the general video.
System
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -30 -
+30.
- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.
- This feature is disable in RGB-PC and HDMI (PC) mode.
53