Download Print this page

Cart Specifications - Craftsman 486.24247 Operator's Manual

15 cu. ft. poly cart
Hide thumbs Also See for 486.24247:

Advertisement

CAUTION: VEHICLE BRAKING
AND
STABILITY MAY BE AFFECTED WITH
THE ADDITION OF AN ACCESSORY
OR AN ATTACHMENT. BE AWARE OF
CHANGING CONDITIONS ON SLOPES.
,
,
,
Refer to the vehicle owners manual for instructions on
safe operation on slopes.
Use the slope guide provided on page 11 of this
manual to determine whether slope angle is too steep
for safe operation.
For best handling and traction, distribute the weight of
the load evenly in the cart.
Always test to make sure your tractor has adequate
towing and braking capabilities whenever hauling a
substantial amount of weight in your cart. Use extra
caution when operating on slopes.
NOTE
DO NOT EXCEED WEIGHT CAPACITY OF CART
(See the specifications on this page.)
One cubic foot of dirt weighs approximately 80 Ibs.
,
,
4.
At the beginning of each season, using a light
machine oil, lubricate the latch, the latch pivot bolt,
and the area of the axle where the draw bar tongue
pivots.
Grease or oil the wheel bearings periodically. Use
automotive wheel bearing type grease or 20 weight
oil.
Check periodically for loose bolts.
Keep tires filled to the recommended tire pressure of
12-14 Lbs.
CART SPECIFICATIONS
Tires:
15" x 6" Pneumatic
Axle:
1" Dia. Steel
Capacity:
Up to 750 Lbs. Max.
Approx. Sh.Wt. 105 Lbs.
,
To dump material from the cart, release the spring
latch on the tongue by pulling the latch lock lever
forward, away from the cart. The cart bed will then tilt
backwards to empty its contents. After emptying, pull
the front of the bed down toward the cart tongue until
the latch snaps into place.
6.
The maximum towing speed for this cart is 10 m.p.h.
CAUTION: TO AVOID POSSIBLE
iNJURY, BEFORE RELEASING THE
LATCH BE SURE THAT NO ONE IS
NEAR THE CART.

Advertisement

loading