Contec BX710 Series User Manual page 71

4. BIOS Setup
Description Choice
Onboard Serial Port C
Sets enable/disable for the C serial port.
This serial port is for the touch panel when it is used on the
display device using LVDS connection.
The I/O address is fixed in 2A0H.
Serial Port C IRQ
Select the IRQ to use in the C serial port.
Onboard Serial Port D
Sets enable/disable for the D serial port.
This serial port should be set to Disable since it is for the
device of future expansion.
The I/O address is fixed in 2A8H.
Serial Port D IRQ
Select the IRQ to use in the D serial port.
64
BX710 series User's Manual