Contec BX710 Series User Manual page 54

4. BIOS Setup
Description Choice
Precharge delay (tRAS)
This item controls the number of DRAM clocks to activate
the precharge delay. The default setting for the DRAM
Cycle time tRAS is Auto.
System Memory Frequency
This item sets the main memory frequency. When you use
an external graphics card, you can adjust this to enable the
best performance for your system.
SLP_S4# Assertion Width
Allows you to set the SLP_S4# assertion width. The
default setting is 1 to 2 Sec.
System BIOS Cacheable
Selecting Enabled allows caching of the system BIOS ROM
at F0000h-FFFFFh, resulting in better system performance.
However, if any program writes to this memory area, a
system error may result.
47
BX710 series User's Manual