9.2 Routing Setting
You can use this section to set up router's static routing feature.
Can click enable for Dynamic or Static routing using this option
● IP Address: Enter a destination IP address or subnet
.● Subnet Mask: Enter a Subnet Mask that corresponds to destination IP
address or subnet you entered.
● Gateway: Next-hop IP address.
● Metric: Enter the Metric number for route.
● Interface: You can select the routing Interface (LAN/WAN) using this
option
Note:
1. Gateway IP address must be on the same subnet with the router's LAN/WAN
IP address.
2. If you want destination network to be a single host, then you must enter an IP
address thereof and 255.255.255.255 respectively in Destination Network IP
Address and Subnet Mask boxes.
150M Wireless-N AP/ Broadband Router
47
(iB-WRB150NE)