GE JBS03 Owner's Manual page 33

GEAppliances.com
Possible Causes What To Do
Uncovered foods. ¯ Cover food with lid or aluminum foil.
Tem~rature se.ing too high. ¯Reduce temperature se~ing.
Oven ~hermos~a~ ¯ See ~he 4¢us~ ~he o~en ~hermosta~-Eas~ ~o do
Plug on range is no~ completely ¯ Hake sure ele~rical plug is plugged into a live, properly
A ~se in your home may be ¯ Replace ~se or reset circuit breakec
blown or the circuit breaker
tripp~.
Oven controls improperly set. ¯ See the Usfng the clock and timer section.
A ~se in your home may be ¯ Replace ~he fuse or reset the circuit breaker.
The cl~k is turned off from ¯ See the Using the clock and timer section.
showing in ~e display.
The door is out of position. ¯ Because the oven door is removable, it sometimes gets
door,°Ut of positiOnpush downduringon theinstallati°nT°high corner, straighten the
off and on during
You have a ~n~ion error code. ¯ Press the CLEAR/OFF pad. Put the oven back
seconds and then reconnect power. If the function
error code repeats, call for sewice.
¯ On self-cleaning models, if a function error code
appears during the self-cleaning cycle, check the oven
door latch. The latch may have been moved, if only
slightly, from the locked position. Hake sure the latch
is moved to the right as far as it will go. Press the
CLEAR/OFFpad. Allow the oven to cool for one hour.
Put the oven back into operation.
Power outage or surge.
¯ Some models will automatically resume their setting once
the power is restored. On models with a clock, you must
reset the ctock~ If the oven was in use, you must reset it by
pressing the CLEAR/OFF pad, setting the clock and
resetting any cooking function.
Power failure.
Oven control pads were not
pressed properly.
¯ Reset the clock.
¯ The BAKEand BROIL HI/LO pads must be pressed atthe
same time and held for 3 seconds.
O"