Base Settings - Amplicomms BigTel 1200 User Manual

Base settings

1. In idle state press the menu key
2. Select Settings and press
3. Select Base settings and press
- Ringer: select Ringtone and select the desired melody
- or -
select Ringer volume and select the volume.
- Dial mode: the standard dialling mode for analogue phones
is "Tone". On some older phone systems the dialling mode
must be set to "Pulse". Please see your phone system's user
guide for more information.
- Flash time: select 100 ms, 300 ms or 600 ms. The use of sup-
plementary services requires a flash signal of a specific
length. You can obtain information about available supple-
mentary services and the required flash time from your tele-
phone service provider.
- System PIN: in delivery state, the system PIN is set to
"0000".
- Base reset: you can reset the base station to delivery state.
Enter the PIN (in delivery state "0000") and answer the
query with.
24
Helpline 0844 800 6503 (See page 25 for costs and hours of operation)
.
.
.
.