Related Manuals for Nolan LiveMIC2
Summary of Contents for Nolan LiveMIC2
-
Page 1: User Guide
LiveMIC2 Bluetooth Wireless Microphone P/N NSRXRM3C2MS2 USER GUIDE Declaration Conformity. declare that product NSRXRM3C2MSX conforms to the R&TTE Directive 1999/5/RC. FCC ID:TNZNSRXRM3C2XXX 0678... -
Page 2: Getting Started
INTRODUCTION The LiveMIC2 allows capturing the source of audio wirelessly and freely with internal Uni-directional and Omni-directional microphone units. The audio jack supports own favor external stereo or mono microphone. Users can listen, capture or record the audio/voice of subject with clarity sound from Bluetooth wireless microphone. -
Page 3: Product Overview
Please check the contents carefully and contact your local dealer immediately if anything is missing or damaged. PRODUCT OVERVIEW See image below. Please note some models will differ slightly in style, colour and the functionality may vary according to their specifications. External Mic Jack USB Charging Uni Mic... - Page 4 CHARGING Plug the USB charging cable into LiveMIC2 mini USB connector. Plug the other side of the USB charging cable into a powered USB connector. When charging, the amber LED will be lighted. When charging is completed, the amber LED will be turn off or dim.
- Page 5 LED indication. Please ensure you are in correct pairing mode during the pairing. Type A and Type B pairing modes supporting: LiveMIC2 can work with 2 different types of devices. Type A: Audio receivers, speakers, PA systems and headphones.
- Page 6 Microphone Type A: To pair with an A2DP enabled Bluetooth audio receivers, speakers, PA systems, hearing aid or headphones Turn on the LiveMIC2 and into type A pairing mode. Type A pairing mode Initiate pairing feature on the audio receiver.
- Page 7 Important Note: LiveMIC2 supports four sets of ※ pin code: 0000, 1111, 1234 and 8888. It covers the most of speakers, receivers and headphones. Type B: To pair with iPhones, iPads, tablets, android phones, smartphones, laptop, Mac and PCs…etc . Turn on the LiveMIC2 and into type B pairing mode.
- Page 8 If the bluetooth driver does not have it, please download or get it from your Bluetooth hardware supplier. 2. Select LiveMIC2 as your default audio input device at “Sound” under Control Panel. 3. After both devices paired and connected, the blue LED will change to flash slowly.
- Page 9 Live MIC2(00:15:71:13:b5) Bluetooth Operations Add a Bluetooth device Show Bluetooth devices FRYS Live MIC2 Open Bluetooth settings (This Computer) (Remote Deviec) Open Bluetooth folder View remote device information Live MIC2 Device Type: Audio headset Show file transfer dialog View Device Properties Singal Strength: Audio Services To use remote device’s speaker to listen to Audio from this PC...
- Page 10 Auto-reconnect to the Microphone Once Microphone is paired with your Bluetooth device, you just need to turn on the Microphone and your Bluetooth device in the later using, and they will connect to each other automatically. If they were failed to connect due to any reason, please repeat the pair/connect procedure again.
-
Page 11: Using Microphone
USING MICROPHONE The LiveMIC2 supports internal and external microphone Using internal Uni and Omni directional microphone Put LiveMIC2 microphone close to the sound source around 8 inches to captured the best sound quality. max. 20cm Too far away 8 inches Press the microphone select button, the correspond internal microphone will be used. - Page 12 Both unidirectional and omnidirectional microphones have their advantages and disadvan- tages. The important thing is to know the applica- tion of the microphone in use to know which would be better for the given situation around. Unidirectional (Cardioid) microphone is used that the target sound source pick up directly in front of the...
- Page 13 Using external microphone Plug the suitable 3.5mm audio plug of external microphone into the LiveMIC2 audio jack and select the external MIC on the select button. LiveMIC2 will disable internal MIC and use the external MIC for sound capturing. External Mic Switch...
- Page 14 Signal retrun Microphone Microphone Groud or empty Adjust microphone gain and mute the LiveMIC2 The G+/G- buttons is used to adjust the microphone input gain. Each microphone gain can be adjusted when it is using, and the gain will be stored after setting.
- Page 15 Bluetooth audio transmission will always cause a little audio delay, it may cause the audio echo or delay effect when listen the voice in real time environment. The LiveMIC2 supports low latency audio with FastStream. To achieve the low audio lag/delay, the receivers/speakers need...
-
Page 16: Visual Indication
VISUAL INDICATION The POWER/MODE/AUDIO LED can also indicate the status of LiveMIC2 working statues. Statues Indication Charging Amber LED is On Blue LED very slow flashing, approx. Not Connected every 5 seconds Blue LED medium Connected speed flashing, approx. every 2 seconds... -
Page 17: Troubleshooting
Statues Indication Power On Blue LED flash once Power Off Amber LED flash once Amber LED slow flash, Mute approx. every 5 seconds TROUBLESHOOTING Please note that you should also be familiar with the operation of your audio receiver, mobile phone or other connecting Bluetooth device. - Page 18 Problem Likely Cause / Solution LiveMIC2 LiveMIC2 and audio does not receiver were out of reconnect. range for more than 30 Lost Connection. feet. Turn both Blue LED flashes microphone and audio at 5 second receiver off and turn on intervals.
-
Page 19: Customer Service Information
Ensure you are using Cannot pair with Type B pairing mode with iPhone, iPad, blue and amber light Mac, PC...etc flashing alternatively CUSTOMER SERVICE INFORMATION For other Nolan Bluetooth products or support, please view website – www.nolan-sys.com, www.aleadinc.com email info@nolan-sys.com,... - Page 20 DISCLAIMER Whilst every effort has been made to ensure that the information in this manual is accurate and complete, no liability will be accepted for any errors and/or omissions made. manufacturer reserves the right to make changes and improve- ments to the specifications and features of the hardware and firmware of the products described in this document without prior notice.