C100C Rear Panel Connections - McIntosh C100 Owner's Manual

C100C Rear Panel Connections

AMPLIFIER POWER
CONTROL Outputs send
turn-on signal to a McIn-
tosh Power Amplifier when
the C100C is turned on.
TO C100P Connector
accepts a DB25, 25
conductor cable that
connects all control
signals and power sup-
ply voltages from the
C100C to the C100P.
AMPLIFIER POWER CON-
TROL Outputs send turn-on
signal to a McIntosh Power
Amplifier when the C100C
Front Panel Spk/Amp 1 and/
or 2 is on.
6
DATA PORTs send signals to
compatible source components
to allow you to control them
with HR100 remote control.
SUM DATA PORT
send remote signals
to a McIntosh RCT
Translator.
C100C Rear Panel Connections
SWITCHED AC outlets
turn on when the C100
turns on and are used to
supply AC power to ac-
cessory components.
The EXT (external)
Sensor jack allows you
to connect a McIntosh
Keypad or IR sensor
for remote operation.
Connect the C100C
power cord to a live AC
outlet. Refer to informa-
tion on the back panel
of your C100C to deter-
mine the correct voltage
for your unit.
UNSWITCHED AC
outlet stays on at all
times when the C100
power cord is con-
nected to a live AC
outlet.
Main Fuse
holder, refer to
infromation on
the back panel of
your C100C to
determine the
correct fuse size
and rating.