Specifications; Double Insulation - Makita LS1016 Instruction Manual

SPECIFICATIONS

Model
Blade diameter
For all countries other than European countries
For European countries
Hole diameter
For all countries other than European countries
For European countries
Max. Cutting capacities (H x W) with 260 mm in diameter
Miter angle
0°
45°(right and left)
52°(right and left)
60°(right)
Special Max. Cutting capacities
Crown molding 45 ﾟ type
(with Crown molding stopper used)
(with Horizontal vise used)
-1
No load speed (min )
Laser Type (LS1016L, LS1016FL)
Dimensions (L x W x H)
Net weight
For all countries other than European countries
For European countries
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･

DOUBLE INSULATION

･
To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
45° (left)
42 mm x 310 mm
58mm x 279 mm
42 mm x 218 mm
58 mm x 197 mm
-
-
Base board (H)
Bevel angle
68 mm x 310 mm
91 mm x 279 mm
68 mm x 218 mm
91 mm x 197 mm
68 mm x 190 mm
91 mm x 171 mm
68 mm x 155 mm
91 mm x 139 mm
Red Laser 650 nm,
END210-6
9
LS1016/LS1016L/LS1016F/LS1016FL
0°
168 mm
120 mm
1.6mW ( Laser Class 2M )
718 mm x 640 mm x 671 mm
LS1016L/LS1016F .....23.7 kg
LS1016L/LS1016F .....24.2 kg
･
When performing slide cut, first pull
carriage fully and press down handle,
then push carriage toward the guide
fence.
･
Do not place hand or fingers close to the
blade.
･
Never look into the laser beam. Direct
laser beam may injure your eyes.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
255 mm - 260 mm
260 mm
25.4 mm
30 mm
45° (right)
29 mm x 310 mm
43 mm x 279 mm
29 mm X 218 mm
43 mm x 197 mm
-
-
3,200
LS1016 .....23.6 kg
LS1016FL.....23.8 kg
LS1016 ....24.1 kg
LS1016FL.....24.3 kg
/II