Call Waiting; Caller Line Identification - Philips SE735 User Manual

EN
Switch between an internal and external call
c
1. Press
Three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three
parties can share the conversation and no network subscription is required.
1. Press and hold
longer hear you).
2. Long press
Handsets
m
and press
The called handset rings.
r
3. Press
4. Press and hold
Conference
TIP If Conference
established if the second handset takes the line when there is already an external call in progress.

Call waiting

If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a
second incoming call. The number or name of the second caller will also be displayed if you have subscribed to
Caller Line Identification service (CLI). Please contact your network provider for more information on this
service.
Press
r 2
+
r 1
+
r 0
+
Alternatively, you may press
waiting. To confirm, scroll
The above operations may be different according to your network.

Caller Line Identification

Caller Line Identification (CLI) is a special service that you may subscribe from your network operator. If you
have subscribed to CLI service, the identity of the caller (caller's number or name) will be displayed on your
handset during an incoming call. If you have not subscribed to this service, or if the caller has chosen to with-
hold the number, the identity of the caller will not be displayed. Please contact your network provider for
more information on this service.
24
key once to switch between an internal call and external call.
c
to put the external call on hold and start the intercom procedure (the caller can no
c
to display the handset numbers which are available for intercom. Scroll
m
and press to call all the handsets or scroll to the specific handset you want to call
SELECT
.
SELECT
key on the called handset to answer the internal call, where both internal callers can talk.
c
for 2 seconds on the first handset to start the three-party conference, whereby
is displayed on the screen.
mode is activated (see page 54), a three-party conference call is automatically
Operation
Put the current call on hold and answer the second call.
End the current call and answer the second call.
Reject the second call and continue with your current call.
m
OPTION
:
to your desired option and press
Call
Accept & Hold,
to select
m
OK
Accept & End Reject CW
or
.
:
All
to
during call