BMW K1200GT Rider's Manual page 127

/rear-light bulb) clockwise to
install it in the bulb housing.
Seat retaining pins 7 of the
bulb housing in retainers 6.
Make sure that the wires are
not trapped.
Install screws 1.
Replacing front turn
indicator bulbs
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Always make sure that the
motorcycle is stable and
firmly supported.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Switch off the ignition.
Remove screw 1.
Pull the bulb housing for-
ward to remove
Disconnect plug 2.
7
125
z