BMW K1200GT Rider's Manual page 116

7
114
The cable of the ABS
sensor could chafe
through if it comes into
contact with the brake disc.
z
Make sure that the ABS
sensor cable is routed
correctly.
Clip the ABS sensor cable
into three retaining clips 3.
Route the ABS sensor cable
between the brake caliper
and the front forks as illus-
trated here.
Remove the adhesive tape
from the wheel rim.
Install the front mudguard
and install screws 1 on left
and right.
Firmly pull the handbrake
lever until the pressure point
is perceptible, and repeat
this operation several times.
Removing rear wheel
Place the motorcycle on
centre stand ( 83)