Product Information
Polaroid MiniPortrait 204/404 Camera
Potential Operator Errors
Black picture
Incorrect image size
(Possible blurry
image)
Blurry image
No image in LCD
display window
Nothing happens
when shutter button
is pressed
Unable to access
program mode menu
(continued)
Camera dark slide not
removed before taking
picture
Flash turned off
Incorrect camera-to-subject
distance
Not using accessory lens
when taking pictures at 60
inches (1.5m)
Smudge on lens
Close-up lens not seated
properly
Camera not plugged in or not
turned on
Aiming light out; aiming light
must be on (blinking) when
the picture is taken
PULL FILM displayed in LCD
panel
20
Remove dark slide from film
holder prior to taking pictures
Slide flash switch to the ON
position prior to picture-taking
Make sure aiming light beams
converge on subject's chin.
Always use accessory close-up
lens when taking pictures at 60
inches (1.5m)
Clean lens with lens tissue or
eyeglass tissue
Recheck lens seating
Plug into outlet and turn camera
on
Press aiming light button and
take picture before it stops
blinking (approximately 15
seconds)
Pull the film frame; program
menu cannot be accessed until
display reads READY