General Safety Information; Scope Of The Document; Device Description; Standards And Approvals - Ametek DR6300 SERIES Supplementary Instructions Manual

Radar level instrument for 2-wire control systems (solids)

Hide thumbs Also See for DR6300 SERIES:

Supplementary instructions manual (20 pages)

Table Of Contents

Table of Contents

DR6300 SERIES

1.1 Scope of the document

These instructions are applicable only to the explosion-protection version of the radar level

transmitter. For all other data, use the Quick Start and Handbook. If you do not have these

documents, please contact the nearest office or download them from the manufacturer's

internet site.

INFORMATION!

The information in these supplementary instructions only contains the data applicable to

explosion protection. The technical data for the non-Ex version in the Handbook shall be valid in

its current version, provided that it is not rendered invalid or replaced by these supplementary

instructions.

WARNING!

Installation, commissioning and maintenance may only be carried out by "Personnel trained in

explosion protection".

1.2 Device description

This device is a 2-wire level transmitter that uses FMCW (Frequency-Modulated Continuous

Wave) radar technology. It measures level, volume, distance to surface, and reflectivity of solid

particles, granulates and powders.It is suitable for installation on storage tanks and silos.

Measurements are displayed via a DTM (device type manager) for remote communication or on

an optional integrated display screen with wizard-driven setup and online help functions.

The level transmitter is approved for use in potentially explosive atmospheres when equipped

with the appropriate options.

1.3 Standards and approvals

DANGER!

In compliance with European Directive 94/9/EC (ATEX 100a), the ATEX version of the device

described in these Supplementary Instructions conforms to European Standards EN 60079-

0:2006, EN 60079-1:2007, EN 60079-11:2007, EN 60079-26:2007, EN 60079-27:2008, EN 61241-

0:2006, EN 61241-1:2004 and EN 61241-11:2006. The Ex ia / Ex iaD and Ex d[ia] / Ex tD[iaD]

versions are certified for use in hazardous areas by the KEMA Quality B.V. under

KEMA 07ATEX0068 X.

WARNING!

Carefully read the ATEX approval certificate. Obey the boundary conditions.

The certificate is given on the DVD-ROM supplied with the device. You can also download the

certificate from our internet site.

DR6300-LM ATEX, EDO 2-13-118, Issue 1