Table of Contents
Advertisement
SERVICE
5
5.1 Periodic maintenance
No maintenance is necessary.
5.2 Keep the device clean
DANGER!
Risk of electrostatic discharge from the blue plastic sun cover, Drop antenna and the flange
plate protection (an option for the Drop antenna).
WARNING!
Do not clean plastic parts in a hazardous area.
Obey these instructions:
• Keep the thread of the terminal compartment cover clean.
• If dirt collects on the device, clean it. Wipe the plastic sun cover with a damp cloth.
• If you clean the Drop antenna or the flange plate protection, wipe the plastic parts with a damp
cloth.
5.3 Returning the device to the manufacturer
5.3.1 General information
This device has been carefully manufactured and tested. If installed and operated in accordance
with these operating instructions, it will rarely present any problems.
CAUTION!
Should you nevertheless need to return a device for inspection or repair, please pay strict
attention to the following points:
Due to statutory regulations on environmental protection and safeguarding the health and
•
safety of our personnel, manufacturer may only handle, test and repair returned devices that
have been in contact with products without risk to personnel and environment.
This means that the manufacturer can only service this device if it is accompanied by the
•
following certificate (see next section) confirming that the device is safe to handle.
CAUTION!
If the device has been operated with toxic, caustic, flammable or water-endangering products,
you are kindly requested:
to check and ensure, if necessary by rinsing or neutralising, that all cavities are free from
•
such dangerous substances,
to enclose a certificate with the device confirming that is safe to handle and stating the
•
product used.
21
www.drexelbrook.com
DR6300 SERIES
DR6300-LM ATEX, EDO 2-13-118, Issue 1
Advertisement
Table of Contents
