Electrical Schematic - Ametek DR6300 SERIES Supplementary Instructions Manual

ELECTRICAL CONNECTIONS
3

3.5.4 Electrical schematic

Figure 3-2: Electrical schematic for Ex i-approved equipment with the 4...20 mA output option
Figure 3-3: Electrical schematic for Ex i-approved equipment with the FOUNDATION™ Fieldbus or PROFIBUS PA
output option
1 Intrinsically-safe power supply (use a second power supply for optional terminal 2 if the device has two 4...20 mA out-
puts)
2 Non-Ex zone
3 Ex zone
4 Resistor for HART
5 H1/HSE converter (FOUNDATION™ Fieldbus output option) or PA/DP link (PROFIBUS PA output option)
6 High Speed Ethernet (FOUNDATION™ Fieldbus output option) or PROFIBUS DP bus line (PROFIBUS PA output option)
17
®
communication
www.drexelbrook.com
DR6300 SERIES
DR6300-LM ATEX, EDO 2-13-118, Issue 1