Baby Call On/Off - Philips Cell Phone User Manual

EN
Set Baby call on/off
Baby call allows you to dial out a programmed number via the telephone line by pressing any key on the handset
(except the OFF key
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Press LEFT / RIGHT
5. Press DOWN, enter or edit the number and press OK to confirm.
BABY CALL is displayed when you return to standby mode.
To turn off baby call,
1. Press the CANCEL soft key.
2. Press OK to confirm.
Registering
Register a new handset to base station
Each base can register up to 4 handsets.
1. In idle mode, press MENU.
2. Press UP / DOWN
3. Press UP / DOWN
4. Before you enter the PIN (by default PIN is "0000"), long press
5. Enter the PIN code
Note : If the base is full, the base would not go into registration mode. See the section "Unregister a
handset", page 35 to unregister a currently registered handset.
34
Other features
).
to select SETTINGS, and then press OK.
to select BABY CALL. Press OK.
to select ON.
to select SYSTEM, and then press OK.
to select REGISTER. Press OK.
and press OK.
on the base for 4 seconds.