Philips VOIP4332S/05 Quick Start Manual

master QSG_VOIP433.qxp 22/05/2006 11:44 Page 1
What's in the box
Handset 2 AAA battery Charger
Welcome
Quick start guide
1 Connect
2 Install
Enjoy
CDROM 2 Power supply
Quick start guide
units
In multipack sets you will find additional handsets, chargers with their power supply
and additional rechargeable batteries.
What else will you need
A telephone line
A desktop or a laptop
with free USB port
Connect
1
Connect to main supply
A
Insert the plug of the power cord
G
into the socket on the bottom of
Base station
the base unit.
Plug the power supply unit into
G
your power outlet.
Insert batteries
C
1
Line cord (and
line adaptor if
relevant)
Broadband Internet
3
connection.
Microsoft ® Windows ® XP
-based PC.
Windows Live™
To remove the battery
G
Messenger installed on
compartment, unlock the battery
your PC and a Windows
door lock at the bottom of the
Live™ Messenger account.
handset.
See http://get.live.com/
messenger/overview Place the 2 rechargeable NiMH
G
Note: Microsoft Internet
AAA batteries, observing their
Explorer version 6 SP1 or
polarities, into the battery
later must be installed on
compartment on the handset.
your PC, though it does
Slide the battery door firmly into
G
not need to be your
place until the battery door locks.
default browser.
Connect the line
B
You may find in the box the line
adaptor. In this case, first plug this
line adaptor onto the line cord
before connecting it to the line
socket.
Connect the telephone line cord
G
to the phone socket on the back
of the base unit and to the wall
phone socket.
2
Connect the charger
D
Insert the plug of the power cord
G
into the socket on the bottom of
the charger.
Plug the power supply unit into
G
your power outlet.
Charge handset
E
Handset may not turn ON for up
to 15 minutes if the batteries are
two low.
Before first use, put the handset
G
on the charger and charge
batteries for 24 hours minimum.
Install
2
Power up your PC and go to
Getting ready
G
A
http://get.live.com/messenger/overwiew to
install Windows Live
create your account (if not already
done).
Connect the USB plug directly to
G
your PC's USB slot.
> Once your handset is powered up,
you will see WELCOME message on
the display.
Press any key to enter the Country
G
menu.
Press Up or Down
G
country. Press OK to confirm.
> Your phone will reset after OK is pressed.
and
™ Messenger
to select your
3111 285 29892